|
Print
|
Pipe & Components |
|
|
| Pipe |
|
Due to ever changing steel prices our pipe pricing may vary with every order. Please call for current pricing.
|
|
Pipe, #40 steel, 1" diam.
Plain Ends
Please call for pricing.
|
(P1.0-21)
|
|
Pipe, #40 steel, 1-1/4" diam.
Plain Ends
Please call for pricing.
|
(P1.25-21)
|
|
Batten End Cap - for 1-1/2"
|
$4.69 / Each
(P-CAP)
|
|
Pipe, #40 steel, 1-1/2" diam.
Plain Ends
Please call for pricing.
|
(P1.5-21)
|
|
Pipe, #40 steel, 2" diam.
Plain Ends
Please call for pricing.
|
(P2.0-21)
|
| Bottom Pipe |
|
Due to ever changing steel prices our pipe pricing may vary with every order. Please call for current pricing.
|
|
Bottom Pipe, #40 steel, 1/2" diam.
Plain Ends
Please call for pricing.
|
(P12-21)
|
|
Bottom Pipe, #40 steel, 3/8" diam.
Plain Ends
Please call for pricing.
|
(P38-21)
|
| Pipe Accessories |
|
|
|
Inner Sleeve Splice, 1-1/2"
Other sizes by special order only.
|
$25.00 / Each
(SL-SPL-1.5)
|
|
Straight Steel Coupling, 3/8"
|
$1.29 / Each
(CPLG-0.38)
|
|
Straight Steel Coupling, 1/2"
|
$1.01 / Each
(CPLG-0.5)
|
|
Straight Steel Coupling, 1"
|
$1.80 / Each
(CPLG-1.0)
|
|
Straight Steel Coupling, 1-1/4"
|
$2.30 / Each
(CPLG-1.25)
|
|
Straight Steel Coupling, 1-1/2"
|
$2.91 / Each
(CPLG-1.5)
|
|
Straight Steel Coupling, 2"
|
$4.17 / Each
(CPLG-2.0)
|
| Scaffold Clamps |
|
These clamps are adjustable and not intended for use with aluminum truss.
|
|
Mega-Claw Swivel, Aluminum Finish
For joining lamp bars to truss etc.
|
$61.15 / each
(MWSM)
|
|
Mega-Claw Swivel, Black Anodized
For joining lamp bars to truss etc.
|
$70.00 / each
(MWSB)
|
|
Mega-Claw. Black Anodized
For joining lamp bars to truss etc.
|
$30.38 / each
(MWB)
|
|
Scaffold Clamp - 1-1/4" to 2"
Adjustable - Fixed Right Angle
Cheeseboro Type - not intended for use with aluminum truss
|
$15.77 / Each
(SFCL-1.5-RA)
|
|
Scaffold Clamp, 1-1/4" to 2"
Adjustable - Swivel
Cheeseboro Type - not intended for use with aluminum truss
|
$16.15 / Each
(SFCL-1.5-SWIV)
|
|
Swivel Coupler, aluminum finish
Safe vertical working load - 1,100 pounds
|
$40.50 / each
(MLSM)
|
|
Swivel Coupler, Black Anodized
Safe vertical working load - 1,100 pounds
|
$45.00 / each
(MLSB)
|
| Steel Pipe Clamps |
|
Pipe Clamp, steel, 1-1/4"
With rounded edges.
|
$7.65 / Each
(PC1.25)
|
|
Pipe Clamp, steel, 1-1/2"
With rounded edges.
|
$6.98 / Each
(PC1.5)
|
|
Pipe Clamp, steel, 2"
With rounded edges.
|
$10.06 / Each
(PC2)
|
| Pipe Grid Components |
|
Mega-Gridlock, Aluminum Finish
For use with 1.25" and 1.5" pipe, and 2" OD tube. WLL=1250 lbs
|
$11.92 / each
(MGM)
|
|
Mega-Gridlock, Black Anodized
For use with 1-1/4" and 1-1/2" pipe, and 2" OD tube.
Safe Vertical Working Load = 1250 lbs
|
$11.92 /
(MGB)
|
|
Intersection Bracket, standard
For 1-1/2" pipe.
|
$11.80 / Each
(ISB1.5)
|
|
Telescoping Wall Stabilizer
For 1-1/2" pipe.
|
$35.00 / Each
(WALLSTAB1.5)
|
|
Wall Flange
For 1-1/2" pipe.
Special steel clamps for securing grid pipes to walls to prevent lateral movement of pipe grid. Hardware for pipe included, but not for wall attachment.
|
$6.00 / Each
(WALLFLANGE-1.5)
|
|
Mega-Quick Pipe Splice - for 1.5" pipe - Black Anodized
WLL=600 lbs
Quickly joins two pipes together without drilling or threading. THe splice is the same outside diameter as the pipe for a nice flush look.
|
$10.77 / Each
(MQSB)
|
|
Mega-Quick Pipe Splice - for 1.5" pipe - Aluminum Finish
WLL=600 lbs
Quickly joins two pipes together without drilling or threading. THe splice is the same outside diameter as the pipe for a nice flush look.
|
$10.77 / Each
(MQSM)
|
| Mega-Track Hangers |
|
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. There are two versions of the Mega-Track Hanger. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the track just 3/16 of an inch below the grid pipe. The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset length from the track to the pipe the diameter of the bottom grid pipe plus 3/16 of an inch. The Mega-Track hanger Long has two different track hanging slots so that it will work with either 1-1/2” or 1-1/4” schedule 40 pipe grids. Both of the Mega-Track Hangers use a Mega-Gridlock half to fasten over the pipe and secure from below with four 5/16” socket head screws. The Mega-Gridlock half has slots along the edge that act like a wrench to hold the four Nylock nuts from turning during installation. Only a slight downward pressure with your fingers is required to hold a nut in place for installation. The track hanger slides over the track prior to placing the track in position. Support track approximately every 4 feet.
|
|
Mega Track Hanger, Ceiling Mount, Black
|
$5.38 /
(MTCMB)
|
|
Mega Track Hanger, Ceiling Mount, Mill finish
|
$5.38 /
(MTCMM)
|
|
Mega Track Hanger, Long, Aluminum Finish
Safe Vertical Working Load = 300 lbs
|
$12.31 / each
(MTLM)
|
|
Mega Track Hanger, Long, Black Anodized
Safe Vertical Working Load = 300 lbs
|
$15.77 / each
(MTLB)
|
|
Mega Track Hanger, Long, DIAGONAL - Aluminum Finish
Safe Vertical Working Load = 300 lbs
|
$12.31 / each
(MTLDM)
|
|
Mega Track Hanger, Short, Aluminum Finish
Safe Vertical Working Load = 300 lbs
|
$12.31 / each (Case of 12)
(MTSM)
|
|
Mega Track Hanger, Short, Black Anodized
Safe Vertical Working Load = 300 lbs
|
$15.77 / each (Case of 12)
(MTSB)
|
|
Mega Track Hanger, Short, DIAGONAL - Aluminum Finish
Safe Vertical Working Load = 300 lbs
|
$12.31 / each (Case of 12)
(MTSDM)
|
| Mega-Coupler |
|
Solid nut has tabs that won't break off. Mega-Coupler uses standard 1/2" hex head bolts to secure your load. Has industry compatible 14 mm thick base.
|
|
Mega Coupler, Swivel, Aluminum
|
$43.46 /
(MLSM)
|
|
Mega Coupler, Swivel, Black
|
$48.08 /
(MLSB)
|
|
Mega-Coupler, 90 Degree, Aluminum Finish
Safe Vertical Working Load = 1100 lbs
|
$43.46 / each
(ML9M)
|
|
Mega-Coupler, 90 Degree, Black Finish
Safe Vertical Working Load = 1100 lbs
|
$48.08 / each
(ML9B)
|
|
Mega-Coupler, Aluminum Finish
Safe Vertical Working Load = 1100 lbs
|
$20.38 / each
(MLM)
|
|
Mega-Coupler, Black Anodized
Safe Vertical Working Load = 1100 lbs
|
$23.46 / each
(MLB)
|
|
Mega-Coupler, w/Eye Nut, Aluminum Finish
Safe Vertical Working Load = 1100 lbs
|
$30.77 / each
(MLMSE)
|
|
Mega-Coupler, w/Eye Nut, Black Finish
Safe Vertical Working Load = 1100 lbs
|
$36.15 / each
(MLBSE)
|
| Truss Pick |
|
CNC machined aircraft aluminum billet with pockets to support one piece of 12" box truss. The Mega-Truss Pick will suspend one ton of truss, and an additional one ton of load may be suspended from the lower rigging point. The truss is secured by two aluminum pivoting links with half inch swivel bolts and our solid wingnuts. Has two rigging holes for shackles, motors, or chain hooks.
|
|
Mega-Truss Pick, 12" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$121.63 / each
(MTP12)
|
|
Mega-Truss Pick, 12" truss, Black
|
$141.25 /
(MTP12B)
|
|
Mega-Truss Pick, 15" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$145.00 / each
(MTP15)
|
|
Mega-Truss Pick, 16" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$161.74 / each
(MTP16)
|
|
Mega-Truss Pick, 16" truss, Black
|
$193.51 /
(MTP16B)
|
|
Mega-Truss Pick, 18" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$176.92 / each
(MTP18)
|
|
Mega-Truss Pick, 18" truss, Black
|
$210.48 /
(MTP18B)
|
|
Mega-Truss Pick, 20.5" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$185.20 / each
(MTP20.5)
|
|
Mega-Truss Pick, 24" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$215.72 / each
(MTP24)
|
|
Mega-Truss Pick, 30" Truss, Aluminum Finish
Safe Vertical Working Load = 1 ton truss / 2 ton total
|
$263.32 / each
(MTP30)
|
|
|
